Shape menu – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 55
Advertising
User Manual
User interface
49
Shape menu
You can use this menu to set the layer of the shape, rotate it, move it and change the width and
height.
Moving a shape
Select Shape >
Move….
The following dialog appears:
Click on the relevant radio button to indicate the direction you want to move the element.
Enter the number of millimeters (inches,
m, cm) you want to move the element.
The unit of measure displayed depends on the setting in the "Options" dialog.
Confirm your input by clicking on OK.
Advertising