Printer correction – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 152
Advertising
146
User Manual
Printer correction
The printer may vary from its standard calibration in both the horizontal and vertical directions as
a result of environmental conditions or maker-specific issues.
To adjust the printer's feed rate, select File > Set Printer Correction....
The following dialog appears:
Print a test page with a rectangle whose size you have to specify..
In the Specified Width (X) and Specified Height (Y) fields enter the size of the rectangle
and click the Print Rectangle button..
Measure the width and height of the printed rectangle, and enter these figures in the Actual
Width (X) and Actual Height (Y) fields if they vary from the specified values.
Close the window with OK.
Advertising