Printing/plotting, Selecting pen and inlay – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 166
Advertising
160
Activating the plotter
User Manual
Activate the "Start in Plot Mode" checkbox if Plot Mode is to be launched in the program after a
restart, when opening an Document file or when creating a new project.
Printing/Plotting
Plotting is carried out in the same way as printing (see "Printing").
A marker type must be allocated to a plotter beforehand (see "Allocating the plotter to a marker
type").
Afterwards, the marker type can be calibrated (see "Adapting marker type to printer") and the
plotter set up (see "Adapting marker type to plotter “).
Selecting pen and inlay
Before plotting begins, a dialog appears with the settings for the marker type selected.
Advertising