Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 48)

42

User interface User Manual
Toggle Plot Mode
Changes to plot mode (see section "Plot Mode").
Set Printer Correction…
This menu item enables you to perform printer correction (see section "Printer correction").
Set Material-
dependent Slip…
With this menu item, you can correct the material slip (see section "").
Adjust Marker Type…
This menu item enables you to calibrate the marker type (see section "Adjust printer offset").
Send to…
This menu item enables you to send your current project by e-mail.
Recent Files
This part of the menu lists recently opened files.
Exit
You can use this menu item to exit the program.