Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 157
Advertising
User Manual
151
To make sure that these settings are also available when the program is launched again, you
should set these properties directly in the printer driver (see also the printer's manual/short
guide).
Click on the Windows Start button, then select Control panel > Printer.
Right-click on the required printer and select Properties from the context menu..
Set the right paper.
Adjust printer offset
To calibrate a mapped printer, click on the Calibration... button.
The following dialog appears.
(The actual image depends on the marker type.)
Advertising