Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 172
Advertising
166
Activating the plotter
User Manual
Setting the zero points
The following dialog appears.
(The actual image depends on the marker type.)
Select the pen you wish to use for plotting (see "Selecting pen and inlay").
To calibrate the zero point, enter the coordinates in the X and/or Y boxes and then click on
"Plot Zero Point".
For a fine adjustment, click in the X and/or Y boxes and move the zero point using the
and
keys (for X coordinates) and/or the
and
keys (for Y coordinates).
These settings can also be preset in the Options dialog (see "Calibration dialog“).
Advertising