Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 72)

66

User interface User Manual
Adjusting Properties
The Property Explorer is subdivided into the following categories, which are described in more
detail below.

General

Size and Position

Border and Fill

Behavior

Field

Content
General
Name - Designation of the marked element.
- You can change the name.
- This name is also used for assigning columns when data is imported (see
chapter "Import - Field mappings").
- This name also appears as a column heading in the data grid.
 The name must not contain special or blank characters!