Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 17)

User Manual General Operation

11
Selecting elements
Select element
After clicking on this icon, you can click on elements to select them.
Select multiple elements
If the elements you want to select are next to each other, you can select
them all in a single action by drawing a selection box around them.
Click on this icon to activate the element selection box. Press and hold
down the left mouse button. Draw a box around the elements you want to
select.
Move elements
Elements at the project layer or marker layer can only be moved within the defined project area
or marker area.

Select the element you want to move by clicking on it with the left mouse button. When you
move the mouse pointer over the element, it changes into the following shape, which means
you can move the element:
Hold down the mouse button and move the element to its new position.
Another way to move an element is to use the settings in the Property Explorer, see "Property
Explorer", category "Size and Position". You can enter exact values in this dialog.