Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 175)

User Manual Activating the plotter

169
Editing/Creating plotter symbols
Creating new plotter symbols

In the Symbol Explorer, right-click with the mouse on an empty symbol box and then select
Plotter Symbol Editor...
Editing plotter symbols

Click with the right mouse button on a plotter symbol and then select Edit with Plotter
Symbol Editor...
Calibration dialog
There are three different frames that can be used with the plotter depending on the marker type
selected.
These frames can be set in the Calibration dialog (zero point, pen, etc.).

Select Tools > Options... > Plotter
The Options dialog opens.
The calibration instructions can be found in the user manual for the plotter.
Marker Card Fixture
In the Options dialog, select "Marker Card Fixture".
PLOTPLTA Fixture

In the Options dialog, select "PLOTPLTA Fixture".