Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 52)

46

User interface User Manual
This option shows/hides the caption bar showing the application name and version.
Customize...
This option shows a dialog in which you can change the way the toolbar icons are displayed
on screen, or even create new toolbars.
Project
Showing or hiding the Project Explorer.
Layers
Showing or hiding the "Layer Explorer".
Properties
Showing or hiding the Property Explorer.
Character Map
Showing or hiding the "Character "Map" dialog.
Symbols
Showing or hiding the "Symbol" dialog.
Data Grid
Showing or hiding the data grid.
for data entry. The data are simultaneously shown on the markers (see chapter "Data Grid
Explorer").
Filter
Here, you can filter your current marker according to given criteria so that only the filtered
solution is displayed (see section "Filter functions").
Status bar
Showing or hiding the status bar.
Show Start Page
Showing or hiding the start page in the workspace.
Reset to Default
Sets Settings to default.
Document Field Selection
All Marker fields will be selected.
Grid
This menu item contains the following submenu items.
showing
This option places gridlines over the marker type
You can use the gridlines to help you align the elements
(see chapter "Snapping elements to the
grid“).
Snap to Grid
This is where you specify whether you want elements to snap to the gridlines.
Toggle Orientation
In the rotated view, all elements are shown rotated by 90°. The elements (e.g. barcode or text)
can still be WYSIWYG edited in the rotated view.