Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 81)

User Manual User interface

75
Workspace
The workspace shows the start page as a default when the application is started (Menu View >
Show start page).
When you open a project/marker type, it is displayed in the workspace.
Shortcut menu in the workspace
Right-click inside the workspace.
This shortcut menu appears:
Insert New Page
A new page is added to the active marker type in the workspace.
Insert Marker type
You can use this context menu item to add a new marker. The product catalog is shown, and you
can select a marker type or a template to be pasted from it.
Change Marker Type…
A selection from the product catalog enables you to change the displayed marker type. The
contents are pasted (if possible).
Delete this Page
Mark the page you wish to delete.
Select Layer
Switch to another layer (e.g. marker layer, project layer).
View
Here, you can switch between different views in the docking bars view (see section "View
menu").
Layer Properties
This context menu item enables you to set the layer properties (e.g. color, lock).