Plotter, General – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 115
User Manual
Options dialog
109
Afterwards the respective fonts of the added marker types are used.
This setting is only applied when the program has been restarted.
Plotter
Settings for connected plotters.
General
General settings for the plot mode and the plotter speed.
In the list shown, the connected printers are assigned to the type the printer is handled as:
- as a printer
- as a plotter
- ask user
Ask user
Proceed as follows if you want to change an assignment (as printer/as plotter) selected in the
print dialog:
Modify the assignment for the printer directly here
or
Modify the assignment for the printer to "Ask user".
Open a marker type which you want to print.
Select File > Print….
Select Assign on the print dialog.
A dialog opens for the assignment.