Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 167)

User Manual Activating the plotter

161
Pen selection
Select the pen that is to be used in the plotter. The pen settings are carried out in the Calibration
dialog (see "Calibration dialog").
If "No Pen" is selected, an external pen can be used that is not returned to the pen holder.
Step settings for inlay
The step settings for the inlay are shown when printing on a Marker Card.
Place the inlay on the step shown (1 to 5). Please note that an inlay is not required with some
Marker Cards.