Step 3: selecting project and variant – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 130
Advertising
124
Importing files
User Manual
Step 3: Selecting Project and Variant
This step serves to select the project or the marker type used to effect the import.
There are different options at choice depending on the initial situation:
Selected element
Existing marker type in current project
New marker type in current project
New Project
Selected element
For this option, a marker type must be opened and a marker must be selected.
The import is added from the selected marker on!
If no marker was selected, the data are added from the first marker on.
Existing marker type in current project
Advertising