Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 168)

162

Activating the plotter User Manual
Changing the marker type
When printing several pages or marker types in a project, a dialog indicates which frame with
which marker type is to be printed next.

Click on "Continue Plotting" to send the configuration as shown to the plotter.
If several pages or marker types are present, the next configuration is shown.
After plotting, the plotter waits until the user clicks on the button again.

Click on "Skip" if the configuration shown is not to be printed.
If the project contains further pages or marker types, the next configuration is shown,
otherwise the printing process is terminated.

Click on "Cancel" to terminate the entire printing process.