Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 154)

148

Print User Manual
Set Material-dependent Slip
To adjust the Marker Card margin and Marker Card feed, select File > Set Material-dependent
slip... .
Print a test page with a rectangle whose size you have to specify..

In the Specified Width (X) and Specified Height (Y) fields enter the size of the rectangle
and click the Print Rectangle button. .

Measure the width and height of the printed rectangle, and enter these figures in the Actual
Width (X) and Actual Height (Y) fields if they vary from the specified values.

Close the window with OK.