Adjusting the printer to the marker type – Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 155
Advertising
User Manual
149
Adjusting the printer to the marker type
If the printout is at the wrong position on the print medium (Marker Card mat etc.), then you can
adjust the printer to the medium in question.
The settings are defined on the one hand at the printer when selecting the print medium (see
section "Adjusting the printer to the print medium ") and on the other hand in the program when
setting the margins, feed rate etc. (see section "„Adjusting the printer offset").
Advertising