Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 83)

User Manual User interface

77
The Layer Explorer has the following toolbar:
You can only use the icon buttons on the free layers.
Click on this icon to add a new free layer.
Click on this icon to delete the selected free layer.
Click on this icon to move the selected free layer up one layer.
Click on this icon to move the selected free layer down one layer.
Click on this icon to reduce all free layers to a single layer. You cannot
undo this action.

Click on the layer you want to change, then click on the relevant icon.
The Layer Properties
You can use the "Layer Properties" dialog to change the settings of the layers.
To open the "Layer Properties" dialog, double-click on the name of the layer in the Layer
Explorer: