Configuring the 1746-nt4 module with rslogix 500, Appendix e – Rockwell Automation 1746-NT4 Series B,D17466.6.1 SLC 500 4-Channel Thermocouple/mV Input Module User Manual User Manual
Page 117
Advertising
1
Publication 1746-UM007C-EN-P - July 2004
Appendix
E
Configuring the 1746-NT4 Module with
RSLogix 500
This appendix describes how to configure the NT4 module with
RSLogix 500 v6.10 or higher. To configure your module:
1. Access the I/O Configuration menu.
2. Determine the chassis number and slot location of where the
NT4 module is located. Highlight the module.
Advertising
This manual is related to the following products: