M0:e.2 valid ranges (dynamic), M0:e.2 valid ranges (dynamic) -10 – Rockwell Automation 1746-HSCE,D17466.5 High-Speed Counter Module User Manual
Page 70
Advertising
Publication 1746-UM006B-EN-P - August 2005
4-10 Configuration and Programming
M0:e.2 Valid Ranges (Dynamic)
The Range and Rate Modes support 12 different ranges. This word is
used to enable Range Outputs fields.
M0:e.2 Bits 0 through 11 - Valid Ranges
Bits 0 through 11 represent ranges 1 through 12 respectively. When a
bit is set to 1, the range it represents is enabled. When reset to 0, the
range is disabled.
M0:e.2 Bits 12 through 15
Bits 12 through 15 are reserved and must be reset to 0.
Valid Ranges (bits 0-11)
Corresponding Range
0
Range is disabled
1
Range is enabled
Setup and Control Word, Word 1
Bit Number (decimal)
15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
Valid Ranges
M0:e.2
R R R R
Range
12 11 10 9
8 7 6 5
4 3 2 1
Advertising