Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual - Manual (Page 37)

Rockwell Automation Publication 1734-UM014B-EN-P - June 2013 29
Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4
Create the Example
Application Perform the following steps to create the example application:
1. Start RSLogix 5000 Enterprise Series software to open the RSLogix 5000
main dialog.
2. From the File menu, select New.
3. The New Controller dialog opens.
4. Enter an appropriate Name for the Controller, for example,
POINT_IO_Controller.