Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual User Manual
Page 67
Advertising
Rockwell Automation Publication 1734-UM014B-EN-P - June 2013
59
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software Chapter 5
3. Choose the 1734-OV4E/C module and click OK.
The New Module dialog opens.
.
4. From the New Module dialog, complete the following:
–
Enter a value for Name.
–
Enter a value for Slot.
–
Click Change to modify the module definition values.
The Module Definition dialog opens.
5. For Connection, select Data.
This configures the controller to make a Direct I/O Connection to the
module.
6. Click OK.
Advertising
This manual is related to the following products: