Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual User Manual
Page 5
Rockwell Automation Publication 1734-UM014B-EN-P - August 2013
iii
Table of Contents
Preface
Who Should Use this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Purpose of this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Common Techniques Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Chapter 1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Important Adapter Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About the POINT I/O and ArmorPOINT I/O
2 Port Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Set the Chassis Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adapter Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Empty Slots and RIUP Situations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Power Up a System for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adapter Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
What the Adapter Does . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Hardware/Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Use of the Common Industrial Protocol (CIP) . . . . . . . . . . . . . . . . . . . . . . . 5
Understand the Producer/Consumer Model . . . . . . . . . . . . . . . . . . . . . . . . . 5
Specify the Requested Packet Interval (RPI) . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Support of Rack-optimized and Direct Connections . . . . . . . . . . . . . . . . . . 6
Mixing Rack-optimized and Direct Connections . . . . . . . . . . . . . . . . . . 7
Chapter 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Identify Adapter Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mount the I/O Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mount the POINT I/O Adapter on a DIN Rail. . . . . . . . . . . . . . . . . 11
Mount the ArmorPOINT I/O Adapter and Base on a Wall or Panel
12
Install the POINT I/O Adapter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Install the ArmorPOINT I/O Adapter Module. . . . . . . . . . . . . . . . . . . . . 14
Wire the POINT I/O Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Wire the ArmorPOINT I/O Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 3
Configure the Adapter for Your
EtherNet/IP Network
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuration Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18