Use the i/o connections page – Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual User Manual
Page 91
Rockwell Automation Publication 1734-UM014B-EN-P - June 2013
83
Adapter Web Dialogs Chapter B
•
Interface Counters
–
In Octets, In UCast Packets, In NUcast Packets,
In Discards, In Errors, In Unknown Protos,
Out Octets, Out Ucast Packets, Out NUcast Packets,
Out Discards, Out Errors
•
Media Counters
–
Alignment Errors
–
FCS Errors
–
Single Collisions
–
Multiple Collisions
–
SQE Test Errors
–
Deferred Transmissions
–
Late Collisions
–
Excessive Collisions
–
MAC Transmit Errors
–
Carrier Sense Errors
–
Frame Too Long
–
MAC Receive Errors
Use the I/O Connections Page
To use the I/O Connections page for CIP I/O (Class 1) connection information,
follow this procedure.
1. Click I/O Connections from the tab at the top of the page or panel on the
left.
The I/O Connections page opens.
2. From the I/O Connections page, view the following:
The value for Slot shows
the slot number of the I/O
module this connection is
controlling.
The top value in this column representing Lost shows
the number of packets from the missing source.