Add the digital output module, Add the digital output module 38 – Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual User Manual
Page 46
Advertising
38
Rockwell Automation Publication 1734-UM014B-EN-P - June 2013
Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software
Add the Digital Output Module
1. Right-click the name of the I/O adapter and select New Module.
The Select Module dialog opens.
Expand the Digital tree
.
2. Select the 1734-OV4E digital output module from the list
.
Advertising
This manual is related to the following products: