Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 10)

10 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Preface
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http:/www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Resource Description
EtherNet/IP Communication Modules Installation Instructions,
publication
ENET-IN002
Provides information about how to complete these tasks with EtherNet/IP communication modules in a Logix5000
control system:
• Install the module
• Configure initial application setup
• Troubleshoot application anomalies related to EtherNet/IP communication module use
EtherNet/IP Media Planning and Installation Manual Provides details about how to use the required media components and how to plan for, install, verify, troubleshoot,
and certify your EtherNet/IP network.
This manual is available from the Open DeviceNet Vendor Association (ODVA) at: http://www.odva.org.
EtherNet/IP Secure Communication Module User Manual,
publication
ENET-UM003
Provides information on setting up authentication, encryption, and firewalls, typical architectures, and diagnostics
for modules equipped with secure communication functionality.
Ethernet Design Considerations Reference Manual, publication
ENET-RM002
Provides explanation of the following Ethernet concepts:
• Overview
• Network layout and components
• Network infrastructure devices
• Network infrastructure features
• Protocol
EtherNet/IP Socket Interface Application Technique, publication
ENET-AT002
Describes the socket interface that you can use to program MSG instructions to communicate between a Logix5000
controller via an EtherNet/IP module and Ethernet devices that do not support the EtherNet/IP application
protocol, such as bar code scanners, RFID readers, or other standard Ethernet devices.
EtherNet/IP Embedded Switch Technology Application Guide,
publication
ENET-AP005
Provides details about how to install, configure, and maintain linear and Device-level Ring (DLR) networks by
using Rockwell Automation EtherNet/IP devices equipped with embedded switch technology.
Integrated Architecture and CIP Sync Configuration Application
Technique, publication IA-AT003
Provides information on CIP Sync and the IEEE 1588-2008 Precision Time Protocol.
Integrated Motion on the EtherNet/IP Network Reference Manual,
publication
MOTION-RM003
Reference descriptions of the AXIS_CIP_DRIVE attributes and the Studio 5000 Logix Designer application Control
Modes and Methods
Network Technology Web page,
http://www.rockwellautomation.com/rockwellautomation/
products-technologies/network-technology/overview.page?
Provides information on reference architectures and white papers on networking.
Industrial Automation Wiring and Grounding Guidelines,
publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.