Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 39
Advertising
Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
39
Configure a Supervisor on a Device-level Ring Network Chapter 4
3. Complete the rest of the module configuration in your RSLogix 5000
software project.
The graphic below shows the I/O configuration for an example DLR
network.
4. Download to your Logix controller.
5. Go online with the controller and leave it in Program mode.
Advertising
This manual is related to the following products: