Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 15)

Rockwell Automation Publication ENET-UM001L-EN-P - March 2014 15
Configure a Workstation to Operate on an EtherNet/IP Network Chapter 2
3. Type a name for the new driver and click OK.
The Configure driver dialog box appears.
4. Click Browse Local Subnet.
5. Click OK to close the dialog box.
This new driver is available.
TIP To view devices on a different subnet or VLAN from the workstation running
RSLinx software, click Browse Remote Subnet.