Connections to factorytalk view applications – Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 106
Advertising
106
Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 8 Communicate with PanelView Terminals
Connections to
FactoryTalk View
Applications
To establish communication to a FactoryTalk View application, configure
RSLinx software to collect tags from the controller. A FactoryTalk View or
FactoryTalk View Enterprise application uses RSLinx software as a data server.
RSLinx Enterprise software defaults to four read connections and one write
connection per configured controller. Modify the RSLinx software configuration
as needed.
Advertising
This manual is related to the following products: