Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 102
Advertising
102
Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 8 Communicate with PanelView Terminals
2. Click the By Category tab.
3. Choose your EtherNet/IP communication module and click OK.
Depending on the EtherNet/IP communication module, the Select Major
Revision dialog box may appear. If the dialog box appears, choose the
module’s major revision and click OK.
The New Module dialog box appears.
Advertising
This manual is related to the following products: