Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual User Manual
Page 77
Advertising
Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
77
Interlocking and Data Transfer between Controllers Chapter 6
2. Click the By Category tab and choose your EtherNet/IP
communication module.
3. Click OK.
Depending on the EtherNet/IP communication module, the Select Major
Revision dialog box may appear. If the dialog box appears, choose the
module’s major revision and click OK.
The New Module dialog box appears.
Advertising
This manual is related to the following products: