Rockwell Automation 1734-AENTR EtherNet/IP Network Configuration User Manual - Manual (Page 66)

66 Rockwell Automation Publication ENET-UM001L-EN-P - March 2014
Chapter 6 Interlocking and Data Transfer between Controllers
Produce a Tag To produce a tag, configure the produced tag in the Studio 5000 Logix Designer
project for the local (producer) controller. You do not have to configure the
consumer controllers in the I/O Configuration folder of the producer controller.
Configure the Produced Tag
To configure the produced tag, follow these steps.
1. In the producer’s Controller Organizer, right-click the Controller Tags
folder and choose Edit Tags.
The Controller Tags dialog box appears.
You can produce only controller-scoped tags.
2. In the Controller Tags window, right-click the tag that you want to
produce and choose Edit Tag Properties.