Metrohm IC Net 2.2 - Manual (Page 12)

1 Introduction
IC Net 2.2 4
1.4 Installation
1.4.1 Hardware requirements for the PC
Computer Pentium III with 450 MHz or higher
Operating system Windows ® 2000 or Windows ® XP
Free space on hard disk 12 MB for program files
50 MB recommended for data files
Working memory RAM 128 MB for Windows ® 2000
256 MB for Windows ® XP
Graphics resolution 800×600, better 1024×768 or more
Printer Any printer supported by the operat-
ing system
1.4.2 Software
Installation
To use the 21 CFR Part 11 features of «ICNet 2.2» the operating
system Windows 2000 or Windows XP with NTFS file system is
required.
If you want to update from IC Net 2.1 to IC Net 2.2, proceed as
described in
section 1.4.3.
Insert installation CD into CD drive. Select
<Start> and Run . Find
the file setup.exe on the CD and click on <OK> . Click on IC Net in
the selection menu and follow the setup program instructions.