Metrohm IC Net 2.2 - Manual (Page 174)

7 Methods
IC Net 2.2 166
7.5.5 Peak identification
IC NET / Method / Calibration / Identification
Selecting this menu item or clicking on <Identification> in the
component table opens the Peak identification window with pa-
rameters for tuning the peak identification procedure.
Number of components Number of components in the component
table (read-only).
Scheme Quick choice of identification parameters
scheme.
Standard Set default meanings of identification pa-
rameters:
Height for reference components,
Time
for all other components (ordinary
components).
Nonstandard Set custom meanings of identification
parameters.
Identification Identification parameters.
Reference peaks Identification parameter for reference com-
ponents. Default is
Height .
Other peaks Identification parameter for ordinary com-
ponents. Default is
Time .
Retention units Choice of retention units. Default is min .
Retention time Retention time.
<Update> Updates expected retention times of com-
ponents according to the current chroma-
togram.