Metrohm IC Net 2.2 - Manual (Page 69)

6.4 761 Compact IC
IC Net 2.2 61
6.4 761 Compact IC
6.4.1 761 Compact IC features
The Metrohm 761 Compact IC is a PC-controlled system for ion
chromatographic analyses. The two following versions are avail-
able:
• 2.761.0010 Compact IC without suppressor module
• 2.761.0020 Compact IC with suppressor module
All the parts of the 761 Compact IC like injection valve, high-
pressure pump, conductivity detector, suppressor module and
peristaltic pump, are normally fully controlled by the «761 Com-
pact IC» program. However, the 761 Compact IC can also be
operated using the «IC Net» program. This program also enables
the operation of more than one 761 Compact IC with one PC.
The 761 Compact IC is normally connected to a PC COM port us-
ing the 6.2134.100 connecting cable.
For detailed information about the 761 Compact IC see 761 In-
structions for Use.
6.4.2 761 Compact IC icon
System disconnected System connected System connected
Injection valve in Injection valve in
"INJECT" position "FILL" position
The 761 icon is available in the system window if a 761 Compact IC
has been installed with the New system wizard or by using the
Setup/New devices/Install new device option of the SYSTEM window
(see section 6.1.3). If the system is connected, the 761 icon con-
tains two buttons for manual control of the injection valve at the
761 Compact IC:
<Inject> Switch the injection valve to the "Inject" position.
<Fill> Switch the injection valve to the "Fill" position.