Metrohm IC Net 2.2 - Manual (Page 128)

6 Devices
IC Net 2.2 120
6.17 766 IC Sample Processor
6.17.1 766 IC Sample Processor features
The Metrohm 766 IC Sample Processor is a sampler for auto-
matic sample injection for ion chromatography. It has a capacity
of up to 127 samples each with an effective volume of up to
11 mL.
The 766 IC Sample Processor, which is normally operated using
the keypad of the instrument, can be fully operated using the «IC
Net» program. The 766 IC Sample Processor is normally con-
nected to the 762 IC Interface using the 6.2134.080 or 6.2134.090
cable. If the injection valves at the 733 IC Separation Center are to
be controlled by the 766 IC Sample Processor, the 6.2141.110
cable is required for the connection of the 766 IC Sample Proces-
sor and the 732 IC Detector. Examples for interconnections with
the 766 IC Sample Processor can be found in the 762 Instruc-
tions for Use.
In order to operate the 766 IC Sample Processor with «IC Net»,
the following RS settings have to be made using the
[ CONFIG ]
key on the 766 keyboard:
>RS232 settings
handshake: SWChar
RS control: ON
For detailed information about the 766 IC Sample Processor see
766 Instructions for Use.
6.17.2 766 IC Sample Processor icon
The 766 icon is available in the SYSTEM window if a 766 IC Sample
Processor has been installed with the New system wizard or by us-
ing the Setup/New devices/Install new device option of the SYSTEM
window (see section 6.1.2).