Metrohm IC Net 2.2 - Manual (Page 224)

10 Batch reprocessing
IC Net 2.2 216
10.1.3 Save batch reprocessing queue
QUEUE EDITOR / File / Save
Save the batch reprocessing queue in a batch reprocessing
queue file (
*.bar ) in the working directory. The batch reprocessing
queue editor window remains open.
QUEUE EDITOR / File / Save & exit
Save the batch reprocessing queue in a batch reprocessing
queue file (
*.bar ) in the working directory and close the batch re-
processing editor window.
10.2 Perform batch reprocessing
10.2.1 Reprocess options window
IC NET / File / Open / Batch reprocessing
IC NET / File / Open / Last batch
These two menu items are used to open the Reprocess window, in
which the various options for reprocessing are set and can then
be triggered.
Use method from file for reprocessing
Selection of the desired chromatogram file
whose method should be used for
reprocessing.
If the reprocessing includes reintegration
and/or recalibration, only chromatograms
recorded with the same method should
be loaded into the batch reprocessing
queue.
<Open example> Open the chromatogram selected above in
the
Use method... field.
<Open all files> Open all chromatograms of the batch re-
processing queue.
<Edit sample table> Open the batch reprocessing editor pro-
gram for editing the batch reprocessing ta-
ble (see section 10.3).
Reprocess sample runs
Reprocess all sample chromatograms
(
calibration level = 0 ).