Metrohm IC Net 2.2 - Manual (Page 196)

8 Chromatograms
IC Net 2.2 188
8 Chromatograms
8.1 Chromatogram window
The
CHROMATOGRAM
window is used to show a running or re-
corded chromatogram.
The title bar of the chromatogram window contains buttons for
minimizing, maximizing and closing the window. The window
name consists of the elements "
Ident (method name) chromatogram
name ". A star ( * ) at the end of the name indicates that the chro-
matogram has been changed since the last saving.
The status bar contains two fields. The first field indicates the
current measurement status, one of the listed below:
Ready Chromatogram is ready to start.
Waiting Chromatogram is waiting for the first meas-
uring points.
Measure Chromatogram is being measured.
Measure(Baseline) Recording of baseline.
Finished Measurement finished, but the chroma-
togram is not processed.
Processing Chromatogram is being processed after fin-
ishing.
Failure Failure, e.g. unexpected pump stop, etc.
COM error Error on COM port interface.
Title bar
Status bar
Chromatogram