Metrohm IC Net 2.2 - Manual (Page 53)

5.3 771 Compact Interface
IC Net 2.2 45
5.3 771 Compact Interface
5.3.1 771 Compact Interface features
The Metrohm 771 Compact Interface is a two channel Analog-
to-Digital Converter to acquire two analog signals from two differ-
ent detectors simultaneously or time independent. It contains the
following parts:
• Two 24-bit Analog-to-Digital Converters (often abbreviated
as ADC) to acquire two analog signals from two different de-
tectors simultaneously (for example conductivity detection and
UV detection).
• Two external start inputs.
The 771 Compact Interface is normally connected to a PC COM
port using the 6.2134.100 connecting cable. The 6.2128.170 ca-
ble is used to acquire the analog signal from the 732 IC Detector
(or another detector) and to start the data acquisition with contact
closure from the 733 IC Separation Center.
For detailed information about the 771 Compact Interface see
771 Instructions for Use.
5.3.2 771 icon on the toolbar
The 771 icon is available on the toolbar if a 771 Compact Inter-
face has been installed with the New system wizard or by using the
<Install device>
option of the
WORKPLACE
window (see section
5.1.2). By clicking this icon the 771 Compact Interface window for
parameter settings opens.
5.3.3 771 Compact Interface window
771 icon / Open
The 771 Compact Interface window for parameter settings is
opened by selecting this menu option with the right mouse button
or by clicking the
771 icon on the toolbar. It consists of three tabs
Init
,
RS settings
, and
Links
.
Init
The Init tab of the 771 Compact Interface window contains data ac-
quisition parameters for the 771 Compact Interface.
Label Optional label to name the interface with
maximum 8 characters.
ROM version Instrument program version number.
Measuring per second Number of data points measured per s.
Entry range: 10, 20, 30, 50, 60 points/s