Metrohm IC Net 2.2 - Manual (Page 223)

10.1 Batch reprocessing queue file handling
IC Net 2.2 215
10 Batch reprocessing
Reprocessing is understood to be the subsequent reprocessing
of a series of chromatograms which have been loaded in a
queue (Batch reprocessing queue). For reprocessing accord-
ing to a selected method the settings for calibration, integration,
passport, appearance and report can be altered at will.
A batch reprocessing queue is stored in a batch reprocessing
queue file
*.bar in the Data directory.
10.1 Batch reprocessing queue file handling
10.1.1 Open batch reprocessing queue
IC NET / File / Open / Batch reprocessing
Load an existing batch reprocessing file ( *.bar ) from the Data di-
rectory and open the Reprocess window.
IC NET / File / Open / Last batch
Load the last opened batch reprocessing file ( *.bar ) from the Data
directory and open the Reprocess window.
10.1.2 Create new batch reprocessing queue
IC NET / File / Open / Chromatogram
For creation of a new batch reprocessing queue, open the Chro-
matogram open window. Select the desired chromatograms ( *.chw )
and click the <To Batch> button. Enter the name of the new batch
reprocessing file and press <OK> . The selected chromatograms
are then added to this batch reprocessing queue.
If the reprocessing includes reintegration and/or recalibration,
only chromatograms recorded with the same method should be
loaded into the batch reprocessing queue.