Metrohm IC Net 2.2 - Manual (Page 60)

6 Devices
IC Net 2.2 52
6.2 Watch window
6.2.1 Watch window icon
The watch window icon is one of the components always pre-
sent in a new
SYSTEM window. If the system is connected and
this icon is clicked with the right mouse button, the following
menu item appears:
Open Open the WATCH WINDOW for live display of
instrument values (this window can also be
opened by double-clicking the watch win-
dow icon).
Unlink Delete the WATCH WINDOW from the SYS-
TEM window (not recommended).
6.2.2 Watch window settings
Watch window icon / Open
The WATCH WINDOW displays all live parameters of the interfaces
and devices included in the connected system. It can be set to be
opened automatically if a determination or measure baseline is
started with
SYSTEM / Setup / Watch window (see section 4.4.2).
The WATCH WINDOW can be configured manually by clicking the
frame titles inside the window with the right mouse button. This
opens the following menu:
Manual arrange Possibility to select the parameters which
should be shown or to rearrange the se-
quence of the displayed parameters. This
option opens the
Data source window for se-
lection of the parameters to be displayed in
the watch window. The
Connected field
shows the parameters to be displayed, the
Available field shows the parameters not to
be displayed. The parameters can be
moved from one field to the other using the
or button.
Auto arrange Automatic arrangement of all important pa-
rameters.