Metrohm IC Net 2.2 - Manual (Page 62)

6 Devices
IC Net 2.2 54
6.3 732 IC Detector
6.3.1 732 IC Detector features
The Metrohm 732 IC Detector is a conductivity detector for ion
chromatography. The associated thermostatable detector block
can be used for recording of chromatograms with and without
chemical suppression and is normally installed in the 733 IC
Separation Center. The two following versions are available:
• 2.732.0010 IC Detector with standard detector block
• 2.732.0110 IC Detector with metal-free detector block
The 732 IC Detector, which is normally operated using the keypad
of the instrument, can be fully operated using the «IC Net» pro-
gram. The 732 IC Detector is normally connected to the 762 IC In-
terface using the 6.2134.080 or 6.2134.090 cable. Examples for
interconnections with the 732 IC Detector can be found in the 762
Instructions for Use.
In order to operate the 732 IC Detector with «IC Net», the follow-
ing RS settings have to be made using the
[ CONFIG ] key on the
732 IC Detector panel:
>CONFIG/RS settings/handshake: Swchar
>CONFIG/RS settings/RS control: on
For detailed information about the 732 IC Detector see 732/733
Instructions for Use.
6.3.2 732 IC Detector icon
The 732 icon is available in the SYSTEM window if a 732 IC Detector
has been installed with the New system wizard or by using the
Setup/New devices/Install new device option of the SYSTEM window
(see section 6.1.2).
If the system is connected and the
732 icon is clicked with the
right mouse button, the following menu appears:
Open Open the 732 IC Detector window for parameter settings
(this window can also be opened by double-clicking
the icon).
Unlink Delete the 732 icon from the system.