Metrohm IC Net 2.2 - Manual (Page 218)

9 Sample queue
IC Net 2.2 210
9.2 Sample queue control
9.2.1 Sample queue overview table
IC NET / File / Open / Sample queue
SYSTEM / System / Sample queue
These two menu items open the OPEN window for opening an ex-
isting sample queue file *.que or creation of a new sample queue
file *.que by entering a new name. After confirmation with <OK> the
sample queue overview table is opened showing the current
status of the sample queue:
No Row number.
System System file to be used for the determina-
tion.
Ident User defined identifier for chromatogram.
Will be placed into appropriate passport
field when starting the chromatogram.
Vial Autosampler vial position to take sample
from.
Inj-s Number of injections for the same vial posi-
tion (only 1 injection is permissible for
Level
≥ 1 ).
Started Indication whether the sample has been
started or not:
0 sample not started
1 sample started
2 … n number of injections done
Level Calibration level (see section 7.5) for the
sample: Level
0 stays for normal analysis,
levels 1 and greater for calibration runs.
Correct filling of this column enables to cal-
culate calibration coefficients automatically.
Volume Injected volume of sample in µ L.