ITC IRMA TruPoint Blood Analysis System - Manual (Page 18)

1.10
ALTERNATE LANGUAGES
The IRMA TruPoint analyzer software is available in multiple languages. All
available languages are automatically loaded into the analyzer during the
software installation process.
To select an alternate IRMA TruPoint analyzer software language:
1. Touch the right-hand edge of the screen to
start power-up. Press down and hold the ITC
logo that appears in the center of the screen
during power-up. Continue to press down
(logo will flash off) until the Select
Language screen appears.
2. The Select Language screen displays a
picklist containing all available analyzer
languages. Highlight the desired language
and press
next . The main MENU displays in
the language selected.
IRMA TRUPOINT TOUCHSCREEN INTERFACE
The IRMA TruPoint touchscreen guides the user through each procedure
using screens containing simple directions, buttons, and graphics. Most IRMA
TruPoint screens have a title at the top of the screen that describes the on-
screen display. IRMA TruPoint uses the following conventions and screen
icons:
Does not save entries on the current screen and returns to the
previous screen.
Returns to the beginning of the procedure and does not save
entries made throughout the procedure.
Completes the current procedure and returns to the appropriate
menu.
Allows a displayed or highlighted screen item or setting to be
changed.
Proceeds to the next step in the procedure.
Test Information Button displays on screens where patient test
information can be added to test result record, and initiates
patient test information entry.
Oxygen Therapy Button displays on screens where patient
oxygen therapy information can be added to test result record,
and initiates patient oxygen therapy information entry.