ITC IRMA TruPoint Blood Analysis System - Manual (Page 75)

4.9
RESULTS TRANSFER
The Results Transfer feature allows IRMA TruPoint patient and QC test
results and associated test information to be transferred to idms or other
connected system via the IRMA TruPoint serial port, LAN 10/100, internal
modem (if present) or external modem. If the QA User has enabled Results
Transfer, any IRMA TruPoint user can transfer results. IRMA TruPoint
analyzers can also be configured to automatically transfer test results under
certain conditions. See Section 7-Communications for Results Transfer and
Automatic Results Transfer Setup instructions.
MANUAL TRANSFER OF IRMA TRUPOINT RESULTS
1. Press send from either the main MENU or
RECALL menu. If a send button is not
present, the QA User has not turned Results
Transfer “on”.
2. If the QA User selected either the Serial,
LAN 10/100, Internal Modem, or External Modem transfer method
option during Results Transfer setup, go to step 4.
3. If the QA User selected the User Selects
transfer method option during Results
Transfer setup, the Communication Method
screen displays. Highlight the button next to
the transfer method of choice and press
next .
4. The RESULTS TRANSFER screen displays
transfer instructions. Connect the appropriate
cable (and adapter if required) to the IRMA
TruPoint analyzer and the receiving system.
a. Serial Port transfer: Connect one end of the RJ45 cable to the serial
port on the back of the IRMA TruPoint (labeled “Computer”).
Connect the other end to a receiving system serial port. Note: idms
setup includes specifying which receiving system serial port will be
used for data transfer. Ensure that the cable is connected to the correct
serial port.
b. Internal Modem transfer: Connect one end of the RJ11 cable to the
modem port on the back of the IRMA TruPoint (labeled “Modem”).
Connect the other end to an analog phone line.