ITC IRMA TruPoint Blood Analysis System - Manual (Page 76)

4.10
c. IRMA TruPoint LAN 10/100 transfer: Connect one end of a CAT5e
patch cable to the LAN port on the back of the IRMA TruPoint
(labeled “LAN 10/100”). Connect the other end to a network port.
d. External Modem transfer: Connect one end of the RJ45 cable to the
serial port on the back of the IRMA TruPoint (labeled “Computer”).
Connect the other end to the external modem. Some modems will
require a RJ45 to DB25 connector and others will require a RJ45 to
DB9 connector.
Note:
• External serial servers connect to the IRMA TruPoint.
5. Verify that the receiving system is ready to receive IRMA TruPoint data,
and press one of the following buttons:
a. send : Sends all stored results that have not been previously transferred.
b. resend : Sends all results in memory that were previously sent, along
with a flag indicating their previous-transfer status.
c. cancel : Returns to the recall OPTIONS menu or main MENU.
6. Data transfer can be stopped while in progress
by pressing stop ; the screen will return to the
RECALL OPTIONS menu or main menu.
AUTOMATIC RESULTS TRANSFER
IRMA TruPoint analyzers may be configured to automatically transfer test
results to idms or another connected system. IRMA TruPoint results will
automatically be transferred to idms or other connected system when ALL of
the following conditions are met:
1. The IRMA TruPoint Communications Method is configured to one of
the following: serial, internal modem, LAN 10/100, or external modem.
Automatic Results Transfer will not work when the Communications
Method is configured to User Selects.