ITC IRMA TruPoint Blood Analysis System - Manual (Page 97)

7.1
Section 7
System Settings
OVERVIEW
This chapter provides setup instructions for all IRMA TruPoint system
settings.
SETTING OPTIONS MENU
System settings are configured through the SETTING OPTIONS menu.
Access to Setting Options is controlled by User ID privilege.
• QA Users have access to all system settings menus.
• Non-QA Users have limited access to the device settings menu only.
Access the SETTING OPTIONS menu by pressing the Settings button on the
main MENU. The following options are presented:
Menu: Returns to main MENU.
DeviceSet: Appears only with entry of QA User
ID. Initiate device update from
DeviceSet.
Test: Advances to TEST SETTINGS menu.
Access setup screens for product setup, product lot entry,
calculations, test information, correlation, bypass correlation,
display units, reportable ranges, and reference ranges.
QC: Advances to the QC SETTINGS menu. Set up or modify liquid
controls and QC Lockout schedules.
User ID: Advances to the USER ID OPTIONS menu. Set up or modify
user identification numbers and privileges.
Device: Advances to the DEVICE SETTINGS menu. Access setup
screens for beeper, barometer, communications, date format,
analyzer date and time, printer, and screen contrast.
All IRMA TruPoint system settings are maintained in the microprocessor’s
memory, even when the analyzer is turned “off” or the battery is removed.