ITC IRMA TruPoint Blood Analysis System - Manual (Page 46)

2.16
TEST INFORMATION ENTRY – MISCELLANEOUS
If test information entry is completed before calibration is complete, the
operator is automatically returned to the Calibrating screen.
If calibration completes at any time during test
information entry, the CALIB. COMPLETE
message appears in the upper right corner of the
test information screen. Complete information
entry, or press
next through each remaining screen
to save entries and return to the Calibration Complete, Inject Sample screen.
None of the information screen entries will be saved until
next is pressed on
the last entry screen. Pressing back to return to the Calibration, Calibration
Complete, or Analyzing screens will not save test information entries. Test
information entry can be resumed and completed during the Analyzing phase,
after the test is complete (Results screen), or upon recalling the last patient test
result.
OXYGEN THERAPY
INFORMATION ENTRY
The Oxygen Therapy feature allows the user to enter oxygen therapy
information into the IRMA TruPoint for each patient blood gas test.
Information available for entry includes mode of oxygen therapy and the
relevant settings for each mode. When entered, this information becomes a
permanent part of the patient test record, and may be transferred to idms.
ENTERING OXYGEN THERAPY INFORMATION
• Press the Oxygen Therapy button that appears on the Calibrating or
Analyzing screens. If this button is not present,
the QA User has not enabled this feature or
none of the options apply to the associated test
record. Oxygen Therapy information can also
be entered by pressing the Test Information
button that appears on the Results screen following a test or upon recalling
the last patient test result.
• The first oxygen therapy entry screen will display. Enter information, or
press next to advance to the next entry screen.