ITC IRMA TruPoint Blood Analysis System - Manual (Page 84)

5.6
SCREEN MESSAGE REASON FOR
MESSAGE
CORRECTIVE ACTION
T EMPERATURE ERRORS
“Cartridge out of
temperature range”
Cartridge temperature was
outside of the acceptable
temperature operating range
(12°-30°C / 54°-86°F). Remove and dispose of the cartridge;
re-test with a new cartridge within
temperature operating range.
“Analyzer out of
temperature range”
Analyzer temperature was
outside of the acceptable
temperature operating range
(12°-30°C / 54°-86°F). Press quit to power-off analyzer;
allow analyzer to equilibrate at a
temperature within the temperature
operating range for at least 30 minutes
before resuming testing.
A NALYZER PROBLEMS
“Instrument Error - Error
Code XXXX. Press quit
and restart”
Self-test failed during
power-on or the analyzer
experienced a recoverable
system failure. Press quit to power-off analyzer;
power analyzer back “on”.
“Instrument Error - Error
Code XXXX. Press quit
and call technical
support”
Analyzer experienced an
unrecoverable system
failure. Press quit to power-off analyzer. Call
your service provider for assistance.
“Instrument Error -
Record These Values.
Call Technical Support”
Analyzer experienced an
unrecoverable system
failure. Record values displayed, and press
quit to power-off analyzer. Call your
service provider for assistance.
“Attention! No functional
printer”
Printer is not operational. Press ok to acknowledge the message.
Call your service provider for
assistance.
“Loading Paper” Displayed anytime that the
printer door is removed. Replace the printer door cover to
return to previous screen.
A NALYZER POWER
PROBLEMS
“Low Battery” Low battery condition was
reached that will not allow
continued analyzer
operation. Press quit to power-off analyzer;
replace the battery with a freshly
charged battery.
“WARNING! Remove
damaged AC adapter”
AC adapter voltage was out
of- range Press quit to power-off analyzer. Call
your service provider for assistance.