Kontron CG2100 Carrier Grade Server - Manual (Page 10)

9
2 Features
This chapter briefly describes the main features of the Kontron CG2100 Carrier Grade
Server. It provides a diagram of the product, a list of the server features, and a
diagram showing the location of important components and connections on the server
system.
Figure 1 shows the CG2100 server.
Figure 1. Kontron CG2100 Carrier Grade Server
Table 1 summarizes the major features of the server system.
Table 1. CG2100 Server Features
Feature Description
Peripheral
Interfaces
External connections:
DB-15 video connector (rear)
DB-15 alarms connector (rear)
RJ45 COM2 connector (one front and one rear with same
physical connection that allows front or rear use
only)
Two RJ45 10/100/1000 Mbps network connections (rear)
Four USB 2.0 connectors (rear)
One USB 2.0 connector (front)
Internal connections:
Two low-profile USB 2x5-pin headers for low-profile
USB solid state drives, such as the SMART* Embedded
USB Solid-State Drive. One header is located on the
front panel board and the other header is on the
baseboard.
One DH-10 serial port B header
Six serial ATA (SATA) II connectors
Two I/O personality module connectors
One GCM4/RMM3 connector for an optional Intel® Remote
Management Module 3
Video
On-board ServerEngines* LLC Pilot II Controller
Integrated 2D video controller
32 MB DDR2 Memory
LAN Two 10/100/1000 Mbps Intel ® 82575 PHYs
Expansion Riser card options: